Below is the recommended sizing for the Norco Fluid FS A2 Gen 7. Here you should measure your height with your shoes off.

Please Note: Many bike Norcos' size guides overlap slightly. This is because small adjustments like seat position can accommodate riders who fall between sizes. When you're in this overlap zone, the choice comes down to preference: a larger size for a more stretched-out ride, or a smaller size for a more compact feel.

At MTB Monster, we help customers on a daily basis choose the right size bike for their needs. We consider your measurements, riding style, and past bikes to help recommend the best size. If you're in doubt at all or want to just confirm your thoughts please contact us and we would be glad to help.

Frame Protection in our opinion is money well spent. Your bike is an expensive investment and frame protection helps to protect your paintwork from scratches, scuffs and chips to keep your bike looking spotless for years to come. In essence, frame protection is a custom cut, self-healing frame protection film made from Lotus Pro 10 - 10.3mil thick TPU film (or similar) designed specifically for mountain bikes and electric bikes. It features a ceramic-embedded hydrophobic top coat that effectively repels water, mud, and dirt, making post-ride cleanups faster and easier. Kits are available in both gloss and matte finishes and unless specifically requested we would fit the kit to match the finish of your paintwork. Some bikes have a mixture of matte and gloss paintwork and in most cases mixed finish kits are available. The material of a frame protection kit will act as an extra layer of clear coat and can make the finish of raw carbon more prominent due to the way that the light refracts. Similarly, fitting a matte finish kit can produce a more satin finish and mean that the kit is slightly more visible than when it is installed in a gloss finish.

Currently there are 3 options available

1. Supply and fit.

Our trained and experienced mechanics can install frame protection kits here so that your Norco Fluid FS A2 Gen 7 arrives fully protected and ready to ride. We recommend a 48 hour curing period to ensure that the film adheres properly to the frame, so your order will take a little longer to arrive — but it will be well worth the wait.

2. Supply Only.

If you choose to install the kit yourself, we'll provide you with the kit, instructions, and a squeegee. Just select "Supply Only" and your kit will arrive with your bike — there is no delay to dispatch with this option. There are many informative videos online to guide you through installation. We would advise watching these in advance to see if you feel confident to fit the kit. Patience is a must when it comes to installation.

3. N/A.

Choose this option if you would prefer not to have frame protection fitting.

Please note: If no frame protection kit has been designed for the bike yet, no option other than N/A will appear. However, there is a very good chance we may still be able to get one designed or custom templated to fit. If this is of interest, please contact us here and we can look into it as soon as possible.

If you scroll up the page to just below the image, you will see a green tab labeled 'technical' containing the specification of the bike with all of the componentry details on the Norco Fluid FS A2 Gen 7.

Alternatively, click here to go directly to this tab.

Yes, a water bottle can be mounted to the downtube.

Frame:

Norco provides a limited lifetime warranty , not just for new Norco bikes, but extended to bike models' year 2014 and newer. Norco warrants that Norco frames and rigid forks will be free from manufacturer defects in materials and workmanship for the usable life of the product with original proof of purchase.

Components fitted the bike

All components fitted to the bike are covered under warranty by the respective manufacturer which is typically two years however in some cases, this can vary and items such as suspension are subject to servicing being carried out.

Electrics

Bosch offers a 2 year warranty on the motor, battery and the ancillary parts required for the system to operate such as the display, speed sensor and wiring.

Whether or not a bike is supplied with pedals is at the discretion of the manufacturer. If you select the technical tab on any product page you will see 'pedals' as a one of the items and here it will tell you if they come as standard from the manufacturer. By reducing the number of components included with a new bike, manufacturers can minimise waste and packaging. With so many different types of pedal available it's unlikely that anything manufacturers include will suit everyone. If you require pedals and they are not listed as included in the specification of your chosen bike you can find the Fluid FS A2 that we offer here and of course if you are unsure please get in touch for some friendly advice.

Yes, all of the Norcos we deal with carry a large number of spare parts to support their customers. If you have purchased a bike from MTB Monster, our rider support team will work with you and the team at Norco to get you the parts you need as soon as possible.

The electric bikes that we sell at MTB Monster are completely legal to ride in the UK, both on-road and off-road. The maximum speed that an ebike can be assisted to in the UK is 15.5mph (25kph). It is easily possible to ride an ebike faster than 15.5mph but the motor will not offer any assistance beyond this point. The Norco Fluid FS A2 Gen 7 is set at the maximum level of assistance permitted in the UK.

Pedal bikes with electric support up to 15.5mph (25 km/h) are regarded as equivalent to bicycles by law and therefore, do not require vehicle insurance, a registration plate or a driving license

Yes most upgrades on the Norco Fluid FS A2 Gen 7 are fine, if you fancy changing the brakes, adding some blingy new grips, or maybe a change of fork, you're welcome to make these changes. However, just make sure they are both suitable & compatible with the bike.

Please note with E-bikes:

Changes in gearing or wheel size will need to be reflected in the motor programming as this can affect speed ratings, and this is where it starts to get tricky as it will require the Norco's authorisation. Typically changing anything to do with the motor system of an electric bike is not recommended unless advised otherwise by the bike/motor manufacturer.

How you store the Norco Fluid FS A2 Gen 7 is pivotal for maintaining its condition and ensuring the e-bike is ready to go when you are. Ebike's should be stored clean and dry in a cool environment between 10 to 20°C, with the battery level between 30-60%.

If a battery is ever stored separate to your bike, again make sure it's stored in an area without significant temperature fluctuations. Somewhere that endures extreme temperature changes – such as an outdoor shed for example.

Batteries are highly complex components and are designed to offer a long service life. The service life of the battery is influenced by several factors such as the amount of charge cycles, intensity of usage, charging practice and storage temperatures. That being said, under typical use of going out riding a few times a week, you should expect to get a couple of years of riding without any problems, as that has been our experience for 99% of the ebikes we have sold to date.

Also it's worth bearing in mind, we still have plenty of customers riding bikes purchased over 5 years ago with the original battery, and very rarely do we have customers complain about battery issues. And for peace of mind, if anything was to happen, the batteries themselves are covered by warranty for the first 2 years of use.

Lithium-Ion batteries are, provided certain precautions are met, are safe.

The high-quality lithium-ion batteries fitted to our Fluid FS A2 of e-bikes are equipped with a Battery Management System (BMS) which is continuously acting to detect potential sources of error and protects the cells from overload, undervoltage, overheating and short-circuiting.

According to the Bicycle Association there is a very low risk from un-modified legal Electric Assist Pedal Cycles (EAPCs – street-legal eBikes) if bought complete with their approved batteries and chargers, from reputable Norcos, sold by reputable retailers, and handled according to the manufacturer's' instructions.

All of our bike Norcos we sell, and the electrical componentry they use on their e-bikes, are fully regulated and adhere to the highest standards. It's also worth noting, that they are simply worlds apart in terms of safety, when compared to cheap unregulated imported e-bikes that you would find on any online auction sites.

It's recommended that only a qualified mechanic removes the battery from this bike, as the motor needs to be dropped out in order to access and remove the battery (via specialists tools). Often EMTB designers prefer this over a easily removable battery as it allows them to both reduce weight and improve the performance of the bike.

For fire safety, couriers have restrictions that prevent the shipping of electric bikes with more than 30% charge. This will be more than enough to take your new bike for a quick spin but the bike will require a full charge prior to your first proper ride

The battery is integrated in the downtube and is charged through the port on the frame.

The best practice is to firstly connect the charger to the charger port then plug into the wall socket. This way the charger will automatically switch on and start charging your battery when connected to the wall socket and switch off supply once the bike is fully charged therefore preventing overcharging the battery. As the battery is charged the display (if fitted) will also be charged up at the same time.